Pre-Provisioning Steps

In order to manually provision a phone that is not compatible with the MPP Integration, it must be factory reset and the phone template will need to be set in the bvoip phone system.

For steps on setting the phone template up and factory resetting, please see the following articles: 

• Provisioning Polycom Phones
• Factory Resetting Polycom Phones

Provisioning the Phone Interface Directly

1. Press the homebutton on the physical phone.
    
2. Go to the Settings button.
3. Select the Status option.
4. Go to Network. 
5. Select the TCP/IP Parameters option. Within TCP/IP Parameters, the IP of the phone will be located to access to admin screen.
6. Copy the IP and paste it into a computer browser.
   • If the webpage can’t be reached, type https:// before the IP in the browser.
      
7. In the Password field, type in 456.
   • If the former password does not work, try with 920 or 78521.
8. Click the Submit button. 
9. Go to the Settings section.
10. Expand the Provisioning Server section.
    
11. Change Server Type to the HTTP option.
12. In the Server Address field, input the provisioning URL for the desired extension with http, not https.
    • Ensure that the Server User and Server Password fields remain blank.
13. Select Enable for the Tag SN to UA option.
14. Click on the Save button. 
15. Go to the Utilities section.
16. Click the Reboot Phone option.

The phone will then reboot twice, once for a firmware check and the second to complete the provisioning process.  After the reboot, the phone will be setup fully so that not just calls can be setup, but also BLF keys will function as assigned in the phone system.